Netgear launched its unmanaged internet switches in 2018. These switches allow internet access on wired devices. You can connect televisions, computers, printers, and other Ethernet-enabled devices to its ports. One such smart switch by Netgear is (GS728TP)(V2). It is one of the oldest products by Netgear. Recently, a user stated that he is facing slow internet speed through Netgear Switch (GS728TP)(V2). However, the speed was all good when he connected his computer directly to the router. Let’s dive deep in to the situation and understand what might have caused this problem.
Why is Internet Slow Through Netgear Switch (GS728TP)(V2)
Since the internet switch provides the internet through an Ethernet connection, there is a high possibility that like 70% of netizens, that user has also used a frayed or damaged LAN cable. The following are the most common disadvantages of using a damaged LAN cable in the connection:
- Patchy or intermittent internet connection on connected devices
- Short circuit
- WiFi signal loss
- Sometimes, overheating of the connected device
Thus, if you notice any of the given symptoms on your connected devices, it is time to replace the cable. Get yourself a new Cat6 cable. Be sure that it is compatible and free of damages. Do not buy a cable from any third party. The connection must also be finger-tight. However, if the internet is still slow through your Netgear switch, you should reset and reconfigure it. Move to the next section to understand the procedure.
How to Reset Netgear Switch (GS728TP)(V2)?
To reset the Netgear switch, you will have to access its web GUI on a PC connected to it with the help of a LAN cable. Here are the steps that you need to follow in order to restore the switch to the default factory settings:
- Connect PC to the Netgear Switch (GS728TP)(V2) switch using a LAN cable.
- Load an internet browser.
- Using the default IP address of the switch, log in to it.
- Now, go to Maintenance and select Reset.
- Click Factory Default.
- Check the box on the screen appearing next.
- Click Apply.
- The switch will reset.
In this manner, you can reset the Netgear Switch (GS728TP)(V2). Now, it is time to set it up. FYI, the process is very different from Netgear extender setup. Follow the steps provided in the next section to set up the switch.
How to Set Up Netgear Switch (GS728TP)(V2)?
The switch can be installed with the help of the Smart Control Center Utility. Here’s how:
- Insert the resource CD into the CD drive and run the setup program.
- The Smart Control Center Utility will get installed on your PC.
- Now, the installation wizard will take the charge of guiding you through the installation.
- For this, double click the Smart Control Center Utility icon.
- Select Discover to find the Netgear Switch (GS728TP)(V2) in your network.
- The MAC address of the switch will be displayed once your PC detects it.
- Click Web Browser Access to view the login screen.
- Select login after entering password in the Password field.
- Follow the on-screen instructions to complete the switch setup.
The Final Words
This was all about what to do to fix slow internet speed through Netgear Switch (GS728TP)(V2). Hopefully, after performing a factory reset and setting it up once again, you will be able to fix the problem. Do not forget to keep a check on the cable connections so that no problem can occur in the future.
