NETGEAR AC750 WiFi Extender and Signal Booster (SETUP)

The Netgear AC750 WiFi speed is used by the Netgear model EX2800 range extender. There are simple methods to set it up in your home without any help from support. Have a look at simple steps to complete Netgear extender setup.

How to Setup AC750 via WPS Method?

There is a WPS button on every Netgear WiFi range extender which you can use to connect with your home device without using any cable. Take a close look at instructions to initiate the WPS setup;

1. Just plug in the extender in to the electric wall socket to provide power to it.
2. Then, press the extender WPS button on the extender which is given on the side of the device.
3. Within 2 minutes, you must press the WPS button on the router given somewhere on the back.
4. Now, you have to wait for some time and your devices will connect automatically.

There is one more method that you can use to connect the router to extender with cable (if your router has no WPS button).

How to Setup AC750 via Ethernet Cable?

You have to use an optimal location nearby to the router and there should be a wall socket for power. Now, learn how to connect your NETGEAR AC750 WiFi Range Extender to router via Ethernet cable;

1. You must place the extender near to the router.
2. Use the cable and insert one end to the router LAN port.
3. Connect other end to the extender Ethernet port.
4. Then you must power on the extender and router.

By connecting both of the devices, the setup is not completed. You have to configure it to finish the installation. To configure you just have to visit the mywifiext interface page on computer or laptop.

How to Configure Netgear AC750 Extender?

There are few steps to configure the extender through the interface with the help of your computer or laptop. Have a look at them down here;

1. You have to connect your computer to the extender with the LAN cable or SSID details.
2. Now, open the web browser (it must open a updated one), then type in the URL address mywifiext.net or IP address 192.168.1.250.
3. To search, just press the Enter button and you will get to the interface login page.
4. Here, you must type the admin username and password which you can find in the user manual of the device.
5. By clicking on the Login button, you will reach to the interface page where you can easily configure all settings.

So, these were the steps to configure and finishing the NETGEAR AC750 WiFi Range Extender setup with mywifiext.net or 192.168.1.250.

The Conclusion

Here, you have seen and learned about how to the setup and configure the NETGEAR AC750 WiFi range extender and signal booster.