Failing to connect to a Netgear extender because of a weak WiFi security is really exhausting. This blog will help you address the Netgear WiFi extender weak security issue on iOS devices. Thus, walk through the information given here carefully.
Why are You Seeing Netgear WiFi Extender Weak Security on iOS?
The weak security is an error message that appears on a WiFi-enabled device when it tries to connect to a particular WiFi network. If you are seeing this message on your iOS device while connecting to a Netgear extender network, this might be happening because of weak security levels of your extender. In that case, you should immediately access mywifiext.local on your iOS device and change the security level of the extender. Here’s what you need to do:
- Connect your iOS device to the Netgear extender using a LAN cable.
- Go to mywifiext.local using the Safari browser.
- As soon as you are asked to log in, type admin into the Username field.
- Into the Password field, type password.
- If login details were changed by you, use them.
- Once logged in, move to WiFi settings under the Wireless tab.
- You will see the Wireless settings of both frequency bands of your extender (2.4GHz and 5GHz).
- Here, change the security protocol to the latest security standard.
- Save the changes.
This is how you can change the Netgear extenders security protocol and fix Netgear extender weak security on iOS. However, if the problem does not get fixed, you are supposed to give a read to the next section for further troubleshooting.
Troubleshooting: Netgear WiFi Extender Weak Security on iOS
Here are the steps to follow if you are still getting the weak security error message on your iOS devices:
1. Change the WiFi Password
There are chances that the WiFi password of your range extender isn’t strong enough due to which the WiFi connection is being declined. Therefore, it is time to change the network password of the range extender. You can do it by accessing the wireless settings in the same way as you did while changing the security protocol. However, if you are attempting to do this via a Windows PC, use the mywifiext.net address.
2. Update the Firmware
After completing the Netgear extender setup process, a lot of people don’t pay attention on the extender’s pending firmware update. Perhaps, you are also among them. Know that when the extender runs on the latest firmware version, it flaunts the latest features and functionalities. Apart from this, its security standards are also raised with a firmware update. The steps to complete the process are given below:
- Connect your PC to the Netgear extender using a LAN cable.
- Once done, log in to your Netgear extender using the valid admin credentials.
- Very soon, you will get landed on the dashboard.
- Here, select Administration > Firmware Update.
- Select Check Now.
- The extender will verify if a new firmware version is available.
- If yes, then follow the on-screen instructions to upgrade the firmware to the latest version.
Note: On some Netgear extenders, you will have to download the firmware file separately and upload it on the dashboard. Also, the firmware update process is supposed to be carried out without interruption. Avoid powering down the extender or disconnect PC from the internet during the upgrade.
The Final Words
The Netgear WiFi extender weak security on iOS error message can stop internet access for all iOS devices. Hopefully, with the help of the given troubleshooting techniques, you will be able to get rid of the error message.
