Nowadays, 99 percent of users are reporting a new issue that they are experiencing with their Netgear WiFi range extender. As per users, the LEDs on the extender are green, but they can’t connect to internet.
So, if you are also experiencing Netgear extender green but no internet issue, then you must read this blog once. Here, we have mentioned the fixes that will help you troubleshoot the issue in discussion right from the comfort of your home. Keep reading!
[Fixed] Netgear Extender Green But No Internet
The fixes to troubleshoot the problem in discussion are outlined underneath. Before proceeding further, we would like to tell you that the fixes we have provided here will work the same for every Netgear extender model you have. So, don’t scroll away and continue reading!
Restart Your Netgear WiFi Extender
This is one of the crucial steps to fix Netgear extender green but no internet issue. Yes, restarting! It is the best remedy to troubleshoot issues with the device. Here are the steps to restart the extender:
- Power off your Netgear extender.
- Wait for 1-2 minutes.
- Power the extender back on.
The lights on the extender will start flashing green. To confirm whether the internet is working or not, access the range extender’s settings page through mywifiext.net.
Connect Your Host Router to Netgear Extender
If you are still facing Netgear extender green but no internet issue, then you must try connecting it to your host router wirelessly or using an Ethernet cable. But, if you have not set up the router in a proper way or the firmware on it is not updated yet, do it right away by logging in to your router using its default IP like 10.0.0.1, provide username and password (when prompted), and execute the on-screen instructions.
Hard Reset Your Netgear Extender
Still no luck? Yes? We understand the inconvenience you are facing. Considering you have set up your router, but you cannot connect to it or use the internet, right? Well, in such a case, we suggest you hard reset your Netgear WiFi range extender. Why? Because it seems like the setup process is not performed in a proper way due to which – the LEDs on the extender are green – but you are still not able to use it of access the internet.
So, without much delay, follow the steps highlighted below and know how to hard reset the extender:
- Disconnect the cables connected to your extender.
- You also need to disconnect your host router and the client device (s) from the extender.
Do not unplug your extender!
- Now, find the reset button on your WiFi range extender.
- Upon finding the hole, press it gently using a pin or any similar object.
- Hold it for 10 seconds and release it.
Once you are done resetting the Netgear extender, you need to set it up again from scratch. The instructions to perform the Netgear extender setup process are provided in the next section.
Setup Netgear Extender Manually
- Connect your Netgear extender and your computer.
- Open a web browser and type mywifiext.net in the address bar.
Are you done with it? Yes? Ok great!
- Press the Enter key of your keyboard and you will be landed on the Netgear extender login page.
- Type “admin” as user name and “password” as password (without quotes) and click Log In.
- You will see the extender’s web user interface.
If you have logged in to your Netgear extender’s web based interface, click on “Setup Wizard” from the appearing menu. The list of available WiFi networks will display. Select your host router’s WiFi network. On the next page, enter the WiFi password (passphrase) of your host WiFi router, click Continue and wait for your Netgear extender connect to it. If the connection is successful, you should be able to access the Internet when connected to your range extender.
- Provide the router’s serial number (when prompted) correctly upon logging in to the extender.
- Follow the instructions and configure the Netgear extender using the manual method in a flash.
We hope that configuring the extender in a proper way, the Netgear extender green but no internet issue have gone away.
Update Netgear Extender Firmware
To prevent the same issue from happening again in future, kindly keep the extender’s firmware up-to-date. Bear in mind, Netgear extender no internet issue can persists if the extender’s firmware is not updated timely. Yes, that’s correct! To enhance the extender’s performance and to boost WiFi connectivity straightaway perform Netgear extender firmware.
While updating the firmware, ensure that:
- You do not interrupt the process by turning off your range extender.
- Your Computer, laptop, or Smartphone (any) is connected to your range extender wirelessly or using an Ethernet source.
- You follow the firmware update instructions (as per your model) in the exact way they are provided.
To Wrap Up
Now that you are done applying the fixes listed above, you are all set to access the internet on your connected devices. Anticipating that you have rack up success over Netgear extender green but no internet issue. On the off chance, you are stuck with the same issue, we suggest you power cycle your host router as well. This time, you will surely get success.
