From a number of LED lights present on the hardware unit of a Netgear WiFi range extender, the Power light plays an important role in determining the working status. If the LED stays solid green, it means no worries required. Your extender is all well. However, this LED blinks when the extender is booting. But, if that stage stays for longer, it is an issue and you need to address it immediately.
So, refer to the techniques we have penned down in this write-up and learn what to do if your Netgear WiFi range extender power light keeps blinking.
Why Netgear WiFi Range Extender Power Light Keeps Blinking?
Getting to know about the reasons will let you delve into the troubleshooting process smoothly. Therefore, you should first understand why the extender’s power light is blinking so that you can opt for the correct technique.
- Incomplete Boot Up: The most probable reason why the Power light on the extender is blinking is that it has not been boot up properly. In that case, you are most likely to face mywifiext.net login problems.
- Improper Power Supply: The role of the power supply is quite major in deciding the Power light status of your Netgear range extender. If you connect the extender to a damaged socket, then the extender’s Power light will surely blink thereby giving issues.
How to Fix Blinking Power Light on Netgear Extender?
The previous section revealed the most common reasons why the Power light on your Netgear range extender keeps blinking. It is now time to learn what needs to be done in order to fix the Power light issue:
- Restart the Extender: If the extender’s Power LED is not stabilizing, then it is recommended that you wait for at least 5 minutes and let the LED stabilize. If that does not happen, restart the extender. Well, that does not actually require much effort. Just unplug the extender from its respective socket and wait for some time. Plug the extender back when you feel the glitches have been fixed.
- Ensure Stable Power Supply: There is a high possibility that the socket into which you have plugged your range extender is damaged. Therefore, we recommend you check the socket and if our assumption turns out to be true, you should immediately connect the extender to another socket that lies in the WiFi router’s range (8-10 ft).
With the help of the given techniques, you can easily fix the Netgear WiFi range extender power light keeps blinking issue. However, if things still do not go well, it is suggested that you perform a factory reset using a pin or a paperclip and perform Netgear extender setup once again.
How to Avoid Power Light Related Issues?
The power light issue if appears does not mean that it is due to improper boot up or power supply all the time. It can also occur when the extender’s firmware goes dated. In that case, it is highly recommended that you equip the extender with the newest firmware version. Here are the quick highlights of a Netgear extender firmware update:
- Launch and internet browser on a computer connected to your extender.
- Using the default IP address and Netgear extender login details; go to the Dashboard.
- Select Firmware Update under Management.
- Now, you are required to select Check Now on the next window.
- This will detect whether a new version of firmware is available.
- If yes, walk through the instructions appearing on the screen to update the firmware.
The Final Words
That’s all about what to if the Netgear WiFi range extender power light keeps blinking. We are hopeful that with the help of the techniques provided here, you will be able to make the extender up and running once again.
