Steps to Use Netgear WiFi Extender with Verizon Fios Router

Netgear WiFi Extender with Verizon Fios Router

In order to complete the Netgear WiFi extender setup process via, one needs to connect the range extender to the host router. Apart from a proper power supply, this is the basic requirement for the completion of the process. However, the matter of concern here is that various people have a misapprehension that to install the Netgear extender, they need to join it to the router of Netgear itself. Well, guess what? Not necessarily. You can also use Netgear WiFi extender with Verizon Fios router or any other router that you own. The real deal now is, how? Well, for this, you need to read the steps that have been presented in this blog post.

How to Use Netgear WiFi Extender with Verizon Fios Router?

1st Step: Reset the Netgear Extender

The process to use Netgear WiFi extender with Verizon Fios router can be initiated by resetting the wireless range extender to the factory default mode. To reset your device, here are the guidelines that need your attention:

  • Look for the reset button located on the device.
  • Once you find it, press it gently by using an oil pin or paper clip.
  • Hold the button for about 5 minutes and then release it.

2nd Step: Plug in the Range Extender

As soon as your networking device has reset, the next step is to supply proper, i.e. an adequate and uninterrupted power supply. This is possible if you read the instructions that have been highlighted in this section:

  • Plug the extender into a socket that is located in the same room as the router.
  • Press the button named power on it.
  • Soon the LED light will become green as an indication your device has turned on.

3rd Step: Join the Networking Devices

This segment of the blog post talks about exactly what you came here for, that is how to use Netgear WiFi extender with Verizon Fios router. There are two methods to do this. The first is by using an Ethernet cable and the second is by using a wireless source.

  • If you use an Ethernet cable, ensure that it is not damaged or worn out.
  • Ensure that the connection that you will make is finger-tight at all costs.
  • In case you put your hands on the wireless medium, place the devices close.

4th Step: Connect to the WiFi Network

As soon as you have successfully completed the step of connecting the Netgear WiFi extender with Verizon Fios router, you ought to connect to the network of the extender. For this, you may go through these steps:

  • Locate the WiFi name of your extender in the utility.
  • Click on it and enter the password or network key.
  • Soon your client device will have internet access on it.

5th Step: Access the Default IP Address

Switch on your laptop and ensure it has an antivirus application installed on it. The reason being, if there is even one percent chance that it can get infected by viruses, it won’t. Once you have assured this, here is what you need to do:

  • Load a browser, an updated and clean one.
  • In the address bar or URL field of the browser, enter the default IP address.
  • You can also use the default web address in this case.

6th Step: Log in via the Admin Details

Pressing the Enter key will take you to the login window called Netgear Extender Login. This page will appear with two boxes by the name of Username and Password. Here, you have got to enter the login credentials. Click the Log In button.

  • Ensure that the username is only entered in the Username field and vice-versa.
  • There should be zero typing errors in the entrée field.
  • Keep the Caps Lock key turned off while making the entrée.

Is There More?

Yes, there is. Hitting the Log In button will make the Netgear Genie smart setup wizard appear on your screen. You will find a couple of on-screen prompts there. Read them and complete learning how to use Netgear WiFi extender with Verizon Fios router.

Summing Up

This sums up the blog post written solely on how to use Netgear WiFi extender with Verizon Fios router. We hope that now you will be able to do so in a hassle-free manner, given you have read the easy-to-execute instructions mentioned above. In case you cannot, then it is probably because you did not reset the networking device properly the first way around. To correct your mistake, it is recommended that you reset your Netgear wireless range extender and hold on for a couple of minutes. The reason being, the wireless device will take some time to get restored to the default mode. Once it does, try to use the wireless extender with the Fios router using the instructions given above.