A Guide to Connect Netgear Extender to Windstream Router

A Guide to Connect Netgear Extender to Windstream Router

Windstream is an Internet Service Provider that gives its gateways on rent. People can take advantage of their services by paying monthly or yearly. But, it never means that the WiFi network of a Windstream provided gateways or routers cannot be extended further. Those who own a large house often worry that they can’t connect to Windstream network in some corners. That problem can be simply solved by adding a Netgear WiFi range extender to the Windstream network. We suggested a range extender from Netgear because of its marvelous features. In this post, we will provide you with a definitive guide to connect Netgear extender to Windstream router or gateway so that you can bid adieu to dead zones forever. Here we go!

How to Connect Netgear Extender to Windstream Router?

You can easily connect your Netgear extender to a Windstream router via mywifiext.net if your extender is running on its default settings. Therefore, you should first of all, complete this important task of resetting the extender in order to avoid any difficulty.

To reset your range extender, it is advised that you press and hold its Reset button with the aid of a sharp object. Once your extender resets, you can start the process of connecting it to the main router i.e. Windstream router. Here’s how:

1. Bring Your Devices Closer

There needs to be a decent distance between your WiFi devices if you want them to connect effortlessly. Therefore, start the process by plugging your Netgear extender into the room where your Windstream router is located. After that, you are suggested to switch on the router and then the range extender. For optimal results, you must switch on the extender after ensuring that the Power light on the Windstream device has turned solid green. After you are sure that your devices are getting a stable power, you can move to the next step.

2. Log in to Your Extender

The next step to connect Netgear extender to Windstream router is to access the web-based management panel of the range extender. Therefore, it is suggested that you move towards your PC and switch it on. Connect it to the WiFi network name of your Netgear extender. In case you are not familiar with the SSID, take help from the user manual. The WiFi network password is also mentioned in it. After the connection between devices, open the default browser and visit The login page of your extender will appear on the computer’s screen. Here, you need to input the following values into their respective fields and click Log In.

Log in to Your Extender

  • User name: admin (type in lowercase)
  • Password: password (use lowercase characters only)

3. Choose the Operating Mode

The next screen you will see will prompt you to pick up the working mode for the extender. Since you are trying to extend the network, it is suggested that you select the Extender Mode. The New Extender Setup screen will now welcome you. Click the button with the same label and do what is mentioned below:

  • As soon as the network scan completes, look for the WiFi network name of the Windstream router on the list.
  • To check the correct value, match with the SSID given on the side label of your Windstream product.
  • If you want to extend both the frequency bands, you need to select both networks (2.4 GHz and 5 GHz).
  • Enter the WiFi passwords of the networks and click Connect.
  • The connection between your Netgear extender and Windstream router will complete in a few minutes.
  • Till then, install the latest firmware version on the range extender (if available).
  • Create WiFi network name and passwords for the extended networks.
  • Follow the on-screen prompts to finalize the connection.

This is how you should connect Netgear extender to Windstream router. You are advised to register you extender at the myNetgear portal so that you can get the latest update regarding your products. As the last step, you should disconnect your Netgear extender from the room where you have plugged your router and connect it to a socket in the area where low WiFi range was troubling you. Trust us! It won’t be a dead zone any more. Thus, connect your client device to the extender’s network and enjoy accessing the internet.

To Sum Up

It is very easy to connect Netgear extender to Windstream router. You just need to be careful about a few things. The very first requirement is to reset the extender. After that, you are supposed to pull up the browser and make your extender extend the network broadcasted by the Windstream router. However, you have to be very careful while typing the router’s password. Otherwise, you won’t get successful in connecting your devices. And yes, do not place your Netgear extender in a room filled with WiFi signal interference. It can interrupt the WiFi signal propagation.