A number of people replace their WiFi routers in order to get an enhanced internet experience in USA. However, it leaves them with a question – How do I reset my Netgear extender to a new router? Yes, some users genuinely find it difficult to reset their Netgear extender when they purchase a new router. To resolve this difficulty, we have prepared this guide.
What Does Resetting Netgear Extender to New Router Imply?
Resetting the extender to a new router can be generally interpreted with two different meanings. The first meaning, in very common sense is about restoring the extender’s settings to factory default. However, the second meaning is all about re-setting i.e. performing Netgear extender setup again.
Let us now make you walk through both the processes one-by-one so that you can actually carry out the process what you are looking for.
How to Reset Extender to New Router?
Firstly, we would like to discuss the steps to restore the Netgear extender’s settings to default values. This is because an extender needs to run on default settings if you want to connect it to a new router. Refer to the steps given below to perform a factory default reset of your Netgear extender:
- Ensure that your Netgear extender isn’t connected to any device (not even your old router).
- Now, find the Reset button on your range extender.
- Push that button using a sharp object.
- Hold it for 7 seconds and release it.
- The extender will reset in a while.
How to Re-set Netgear Extender to a New Router?
After restoring the WiFi extender settings to default values, you are suggested to set it up once again. If your new router supports WPS, you need to push the WPS button on your router and extender for setup. However, go through the below given steps for manual setup:
- Ensure that your main router (the new one) is up and running.
- Now, place the extender in the same room as your main router.
- Once done, perform a power cycle of the new router.
- Followed by that, switch on the Netgear extender to power it up.
- Let the extender’s Power light go solid green.
- Open WiFi settings on your PC and find the network named – Netgear_EXT.
- Using the WiFi password given on the label, connect to the network of your extender.
- Open a web browser and visit mywifiext.net login URL.
- Accept the terms and conditions of using the range extender.
- The next screen will ask you whether you want to set up the extender in Extender or Access Point mode.
- Thereafter, choose the router’s WiFi network and enter the password.
- Follow the on-screen prompts to give the admin password, change the SSID and network key, and update the firmware of your Netgear extender.
In this manner, you can re-set the Netgear range extender to a new router. Know that, if you fail with the process, perform a 30-30-30 reset and re-install the Netgear range extender.
To Sum Up
The guide explaining how to reset Netgear extender to a new router ends here. Hopefully, you have now got knowledge on the reset as well as re-set process. So, you can start enjoying the whole home WiFi coverage with the new router and the Netgear extender.
