Can’t Access Here’s How to Fix the Issue!

Can't Access Here's How to Fix the Issue!

Do you often get stuck with the ‘can’t access’ issue whenever you try to log in to your Netgear WiFi extender. Well, you are not alone! Users all across the world are facing the same issue. But, worry not! In this post, we’ve mentioned the top 4 tips that’ll surely help you access without any hassle. So, let’s get started.

Contributing Factors Why You Can’t Access

There can be numerous reasons why you are unable to access the page. Here, we have listed some of the most common reasons:

  • Your internet connection is poor.
  • The connection between your Netgear extender and home router is unstable.
  • You haven’t typed the correct web address in the address bar of your web browser.
  • The firmware of your range extender is either outdated or corrupted.
  • The WiFi signals of your Netgear device are getting interrupted.
  • Technical glitches can also stop you from accessing

Are you fully aware of the reasons stopping you from accessing mywifiext? Good. Now, you are ready to troubleshoot the issue.

Fixed: Can’t Access

The following tips will surely help you troubleshoot the ‘can’t access’ issue:

Tip 1. Use the Correct Web Address

Start by checking the web address you’ve typed in the address bar of your internet browser. Many users make the mistake of your entering the wrong web address. Chances are that you’ve committed the same mistake. To rectify it, it is recommended that you make use of the correct Netgear extender web address.

Also, if you are using an Apple device to log in to your WiFi range extender, then consider using mywifiext.local instead of

Tip 2. Check Your Internet Connection

If there is an internet issue from the end of your Internet Service Provider, that too can stop you from accessing mywifiext. Therefore, ask your ISP to fix the issue as soon as possible. If nothing is wrong from his side, then check the connection between your extender and router.

Is the connection between your devices unstable? If yes, then make sure that the Ethernet cable connecting them is free of damages.

Tip 3. Update the Firmware

If you update the firmware of your Netgear extender to the latest version, that can also help you get rid of the ‘can’t access’ issue. So, what are you waiting for? Perform Netgear firmware update right away!
Confused about how to do that? No problem! Feel free to get in touch with our well-versed technical experts.

They’ll provide you with all the necessary guidelines that’ll assist you in updating the firmware of your WiFi device.

Tip 4. Reboot Your Netgear Extender

Sometimes, your Netgear WiFi range extender just needs a restart from time to time in order to stay away from technical issues like ‘can’t access’. Thus, follow the steps mentioned below and reboot your extender:

  • Disconnect every WiFi-enabled device connected to your extender’s Netgear_ext.
  • Power off your WiFi extender and unplug it from the wall outlet.
  • Let yourself and your device rest for a minute.
  • Now, plug the extender back into the wall socket and turn it on.

Once you are done rebooting your Netgear WiFi range extender, you can connect as many devices with its wireless network as you want.

Tip 5. Perform Default Factory Reset

If none of the aforementioned troubleshooting tip helped you fix the ‘can’t access’ issue, then it’s high time you perform Netgear default factory reset.

Although resetting your Netgear WiFi range extender isn’t that difficult, however, if you face issues while trying to do so, then refer to the guidelines mentioned here.

Summing Up

Here’s to hope that the troubleshooting tips mentioned in this post helped you fix the ‘can’t access’ issue. On the off chance, you’re still struggling with it, don’t hesitate to reach out to our technical experts. They are available for you 24/7.